Ixon-24 Trail Camera

• Control via mobile application.
• High-quality photographs with 24mpx resolution.
• High-definition videos (1080p), with audio, from 5 to 120 seconds in length.
• Built-in 4G function, for immediate sending of recorded images to your email or mobile.
• Daytime photos and videos in color / nighttime in black and white.
• 34 Invisible IR 940nm LEDs. They emit no flash or visible light.
• Integrated 1.44” color TFT LCD screen: allows viewing of registered photos and easy camera configuration.
• High shutter speed (1.2 seconds).
• PIR sensor range: 27 meters.
• Lens viewing angle: 60º / PIR sensor angle: 50º.
• Adjustable PIR sensitivity.
• Integrated laser pointer for correct camera orientation.
• Burst mode photos (1 to 3).
• PIR sensor inactivity interval after each shot: 0s-60min.
• SMS control function: modify settings and take manual photos from the app.
• “Time-lapse” function: the camera will take photos and/or videos at certain intervals (set by the user).
• “Activity interval” function: the camera is only active during a specific time of day (determined by the user).
• Very compact: 140 x 87 x 55 mm.
• Compatible with SD/SDHC cards up to 32 GB (not included).
• Operates with 8 AA 1.5v batteries (not included) or DC 6V/2A transformer (not included).
• Autonomy: 1 month (SMS control option deactivated, no nighttime video, and taking 30 photos a day) / 2 weeks (SMS control option activated, no nighttime video, and taking 30 photos a day).
• Battery compartment with security lock and padlock slot.
• 1x USB Connector.
• Water and snow resistant. Waterproof level IP66.

What is infrared light?The light visible to the naked eye is called visible light. The fact that it is observable and presents different colors is due to the wavelength of the light itself. There are no exact limits in the visible spectrum: the typical human eye will observe wavelengths from 380 to 750 nm, which will correspond to the following colors (ordered from shortest to longest wavelength): violet, blue, cyan, green, yellow, orange, and red.Light with a wavelength longer than red light is called infrared light. Infrared rays cannot be seen with the naked eye.What is 850nm LED infrared light?The intensity of 850nm LED infrared light in the visible part (less than 760nm) does not reach 0, in other words, it still emits weak visible light, and the human eye can still sense the weak light.What is 940nm LED infrared light?The 940nm LED infrared night vision light has a maximum intensity of 940nm, which is far from the visible light wavelength range. When the light intensity reaches 0 in the visible wavelength range, it means the minimum wavelength is greater than the long visible wavelength of 760nm. Therefore, 940nm infrared light is invisible to the naked eye.Differences between 850nm and 950nm LED infrared light

1. In general terms, the higher the wavelength value, the lower the VF value under the same voltage. Under the 20MA voltage condition, the VF value of 850nm is approximately 1.35-1.55V; and the VF value of 940nm is approximately 1.10-1.25V. Among them, of course, the VF value will be different for different voltages.
2. The radiation intensity of 850 is approximately 2-3 times greater than that of 940. If the radiation intensity is high, the brightness will be greater.
3. 3. The 850nm infrared light chip has a visible red dot, while the main advantage of the 940nm wavelength is that the IR LED produces no visible light. In other words, they are completely invisible and can be used in applications requiring more privacy. In fact, many people refer to it as "covert IR". This type of IR is also useful when red light can be mistaken for a signal and cannot be used. The disadvantage of 940nm is that its efficiency is reduced by about 30-40%, and the lighting distance is getting smaller.

__ETS_EMBED_NQ==__