Shopping Cart
Control via mobile app. (At a maximum distance of 50m)
- Easier and more convenient than through the camera menu.
- View and download photos and videos without having to take down the camera.
- Allows you to exclude areas of the frame to avoid false activations.
- Allows you to take a test framing photo for correct camera placement.
Features
- Daytime photos and videos in color. Nighttime in black and white.
- PIR angle/range: 120°/15m.
- 4 invisible IR 940nm LEDs.
- Adjustable PIR sensitivity.
- 32Mpx photos.
- 2.7K video with audio.
- Lens aperture: F=1.6.
- Lens viewing angle: 90°.
- Shutter speed: 0.4 sec.
- Interval between shots: 5sec-1h
- Time lapse function.
- Burst mode: up to 5 photos.
- Adjustable video duration: 5 sec - 3 min.
- Programmable on and off time.
- Compatible with SD cards up to 64Gb.
- Water-resistant (IP65).
- 2’’ LCD screen.
- Thread suitable for tripods.
- Includes screwable base that allows the camera to be placed on trees, walls, or ceilings.
- Works with 8 AA 1.5V batteries (not included) or DC 6V adapter.
- Integrated USB port.
- Autonomy: 6 months on standby.
- Contents: camera, USB cable, instruction manual, strap, and mounting base.
- Dimensions: 138x83x77mm
- Weight: 298g
What is infrared light?The light visible to the naked eye is called visible light. The fact that it is observable and presents different colors is due to the wavelength of the light itself. There are no exact limits in the visible spectrum: the typical human eye will observe wavelengths from 380 to 750 nm, which will correspond to the following colors (ordered from shortest to longest wavelength): violet, blue, cyan, green, yellow, orange, and red.Light with a wavelength longer than red light is called infrared light. Infrared rays cannot be seen with the naked eye.What is 850nm LED infrared light?The intensity of the 850nm LED infrared light in the visible part (less than 760nm) does not reach 0, in other words, it still emits weak visible light, and the human eye can still sense the faint light.What is 940nm LED infrared light?The 940nm LED infrared night vision light has a maximum intensity of 940nm, which is far from the visible light wavelength range. When the light intensity reaches 0 in the visible wavelength range, it means that the minimum wavelength is greater than the long visible wavelength of 760nm. Therefore, 940nm infrared light is invisible to the naked eye.Differences between 850nm and 950nm LED infrared light
- In general terms, the higher the wavelength value, the lower the VF value under the same voltage. Under the 20MA voltage condition, the VF value of 850nm is approximately 1.35-1.55V; and the VF value of 940nm is approximately 1.10-1.25V. Among them, of course, the VF value will be different for different voltages.
- The radiation intensity of 850 is approximately 2-3 times greater than that of 940. If the radiation intensity is high, the brightness will be greater.
- 3. The 850nm infrared light chip has a visible red dot, while the main advantage of the 940nm wavelength is that the IR LED does not produce any visible light. In other words, they are completely invisible and can be used in applications that require more privacy. In fact, many people refer to it as "covert IR." This type of IR is also useful when the red light can be mistaken for a signal and cannot be used. The disadvantage of 940nm is that its efficiency is reduced by approximately 30-40%, and the lighting distance is getting smaller.
fa018
No reviews
Tap to zoom
